Product details
- American Incisco OLCT10 nitrogen dioxide detector
- Detected gas: nitrogen dioxide
- Installation method: Wall-mounted
- Connect cable 3-wire connector M20 (outer diameter 5.5~12mm), 1-wire connector M16 (outer diameter dimensions).
- 4~8mm）
- Protection IP31
- Power supply: 230 or 115 VAC; 21~30 VDC VDC (generally 24 VDC)
- Power is 20 VA
- Temperature range -10~45°C
- Sensor cables can be installed with single or dual OLCT10 probes for boiler rooms, LPG detection, and detection of methane, butane, and propane
- It can be used to detect vehicles and parking lots' natural gas, hydrogen, and other gases.
- One OLCT10 detection transmitter can be installed for boiler rooms, LPG detection of methane, butane, and propane, and can also be installed
- Used to detect natural gas, hydrogen, and other gases in vehicles and parking lots.
- Can be equipped with 1-5 OLCT10 probes for parking lot measurements CO.NO.NO.2.
- Terminal 1: Signal output / 2: 0V / 3: 24 VDC
- Maximum transmission distance OLC10 (gas only): 3-wire system, shielded cable, core wire specification 1~1.5mm², maximum transmission
- 300 meters away
- Dual OLC10 (gas only): 4-wire system, shielded cable, core wire specification 1~1.5mm², maximum transmission
- Transmission distance: 300 meters.
- OLCT10 (Combustible Gas): 3-wire shielded cable, core wire specification 1~1.5mm², maximum transmission distance
- 1 km away.
- OLCT10 (Toxic Gas): 2-wire system, shielded cable, core wire specification 0.75~1.5mm², maximum transmission
- Distance is 4 kilometers.
- LCD screen display, 4-digit numeric display
- Status indicator lights: 4 indicator lights displayed. Green: Power supply, Red: Alarm, Orange: Malfunction
- Gases and units can be selected via the controller
- The panel has three buttons for maintenance, testing, and confirmation: 1: Enter/Menu, 2: -/Test Instructions, 3: /Confirm
- Alarm and Relay: Two independently programmable relays can be set. The alarm status can be set to latch or not, and alarm points can be set
- Placement. Remote or local alarm confirmation.
- The relay status can be set to normally open or normally closed.
- A default fault alarm relay
- Relay capacity: 2A, 250 VAC
- 2A,30VDC
- Certified 3G Certification (EN61779-1 and EN61779-4)
- EN61010
- EN50270
